Victron Blue Power IP65 12 Amp 24 Volt Marine and RV battery Charger

The Victron Blue Power IP65 12 Amp 24 Volt Battery Charger is designed as a completely encapsulated totally waterproof, shockproof and ignition protected European developed quality charger.

The Charger is designed so that not even water, oil or dirt will damage the Blue Power IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin to give your electronics total protection.

The highest efficiency ever!

Setting a new industry standard: with 93% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. So when you are looking for a high tech battery charger with extreme performance consider the Victron Blue Power on the top of your list.

Adaptive 4-stage charge algorithm: bulk – absorption – float – storage

The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. This process ensures that not only do you gain better battery performance but you increase the life of the battery for significantly longer than using a basic charger.

Less maintenance and aging when the battery is not in use: the Storage Mode

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Protected against overheating

Output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail.

Two LED’s for status indication

Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)